Mark

cover

20250430_210523.jpg

20250430_210705.jpg

20250430_210504.jpg

plate_1.png

2025-04-30_9668dac10f89.jpg

0.2mm layer, 2 walls, 15% infill

Chrome

1.jpg

2.jpg

-0.20 mm layer height -With raft and brims -Easy print using ASA

ASA 0.2mm layer, 2 walls, 15% infill with RAFT (easy print)

Panimu

image0.jpeg

I found the brim a nightmare to remove. Prints fine without it, I added a little more overhang slowdown.

PLA, no brim, more slowdown

ernesi

20260103_155828.jpg

20260103_155946.jpg

Added BrimHeads instead of full brim.Moved model to the right (away from the auxilary fan of the H2D)

BrimHeads - 0.2mm layer, 2 walls, 15% infil

digger_rc

IMG_9903.JPG

IMG_9901.JPG

IMG_9902.JPG

ASA0,20 Schichthöhe15% FüllungBrim2 Wände

ASA0.20 layer height15% infillBrim2 walls

ASA - 0.2mm layer, 2 walls, 15% infill

Dave St.

IMG20260406222126.jpg

IMG20260406222113.jpg

Ich habe eine 0,2 mm Nozzle genutzt und damit ein sehr sauberes Ergebnis bekommen, des weiteren habe ich die Position ganz rechts gewählt damit es keine Haftungsprobleme gibt. Ebenso wurde die Lüftung herabgesetzt damit der Druck gelingt. - 0,2 mm Nozzle - weniger Lüftung - Position ganz rechts

I used a 0.2 mm nozzle and achieved a very clean result. Furthermore, I selected the far right position to avoid any adhesion problems. The fan speed was also reduced for a successful print. - 0.2 mm nozzle - Reduced fan speed - Far right position

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

- - -  3D by SMIGI - - -  MEBLE CZARNECKI

49539.jpg

49540.jpg

49536.jpg

49536_(1).jpg

49542.jpg

49541.jpg

49543.jpg

ABS optimized - full infin, brim, best quality and 85% speed.&nbsp;It is 0.6 Nozzle but You can easyly changenit to 0.4 and it will be perfect too :))&nbsp;Have best quaility prints !

0.6mm nozzle, 0.3mm layer, 2 walls, 100% infill - ABS

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>buy me a coffee</boostcontent></boostme>H2S/ H2C/ H2D auxilary fan adapter/deflector.After a few failed prints with the corners closest to the aux fan lifting from the bed and always forget to either lower the fan speed or move the model further away before starting a print. I decided to design this 45 degree adapter,  I had one on my X1 and it worked perfectly

H2S/ H2C/ H2D Aux Fan 45 Degree Deflector

ASIA

Print Profile(7)

Description

Comment & Rating (777)

License

Related Models