Printednest Bird Feeder 4.5

Copyright Claim

Printednest Bird Feeder 4.5

Boost
1141
2005
252

Print Profile(4)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini

100% scale 0.2mm layer, 2 walls, 15% infill
100% scale 0.2mm layer, 2 walls, 15% infill
Designer
8.6 h
1 plate
4.6(103)

With Support 0.2mm layer, 2 walls, 15% infill
With Support 0.2mm layer, 2 walls, 15% infill
Designer
11.1 h
1 plate
4.8(29)

A1mini 86%scale with Supports 0.2mm layer, 2 walls, 15% infill
A1mini 86%scale with Supports 0.2mm layer, 2 walls, 15% infill
Designer
9.8 h
1 plate
4.7(14)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
9.8 h
1 plate
4.8(6)

Boost
1141
2005
252
55
2 k
1.1 k
Released

Description

All about this projects: Birdfeeder 4.0 and Birdfeeder 4.5

 

 

Video assembly instructions:

 

!!! Information for the fine print:  This model does not need supports. Use our 3mf file. We put a large brim for better adhesion of the print. If you are using stl file, add at least a 40mm brim in your print setup. At the same time, it does not speed up printing to a higher speed than is set.  make sure the PEI sheet is properly cleaned and for better adhesion use a spray or whatever you are using !!!

 

 

 

Update 28/1 - This model should not be a problem to print without support. Anyway, since we see that some of you have a problem printing this model, we are adding ready-made 3mf profiles with added supports. They are tree-like and set on critical spots.

 

 

More info about on our Youtube Channel
facebook: https://www.facebook.com/printednest

Printednest Makers | 3d Print Group: https://www.facebook.com/groups/printednest

twitter: https://twitter.com/printednest

instagram: https://www.instagram.com/printednest/

 

 

 

 

Comment & Rating (252)

Please fill in your opinion
(0/5000)

Print Profile
100% scale 0.2mm layer, 2 walls, 15% infill
Support Issue:This model definitely needs supports. Overhangs were very bad, and it got knocked out of the bed even with a brim. Got this, and a lot of spaghetti. I tried 3 times printing this with PLA and PETG. I give up now.
The designer has replied
1
Reply
Hi Kalpik, did you use our 3mf file? We were included large brim for better adhesion. Do you have clean pei sheet? And as you see here in comments, this model doesn't really need supports :-)
(Edited)
2
Reply
Replying to @Printednest :
Yes, I did use the 3mf file. The brim was as big as the one in your photo, but still it got knocked out. The build plate is completely clean also. I don't have any issues with any other prints.
0
Reply
Replying to @kalpik :
Hi again, it can be problem related to your printer. As you can see in statistics. it was printed 200+ times. From 400 downloads. We know about big overhangs. as in your photos bottom part is not nice, but we were counting with this. Its bottom and this is just functional design, thats why angle is on the edge of printing. Problem can be caused by warping and your noozle is hitting print constantly and then it will peaal of the plate. Try from otheer PLA, or cool it changee temperature.
0
Reply
Print Profile
100% scale 0.2mm layer, 2 walls, 15% infill
Nice design. Did't beleive it would work because of the first layers but it finished nice without support.
The designer has replied
3
Reply
Hi, thx for report, so is there any problem with profile? Why 4 stars?
(Edited)
1
Reply
Without support almost impossible to print. It works without but the finish is not 100%...
(Edited)
1
Reply
Thx for sharing your pics, I always love this alien design come out of the printer early morning... Where is Ripley...
0
Reply
easy print, looks great
The designer has replied
2
Reply
Thank you yesferro! In white it looks nice! :-)
0
Reply
Easy print :), dont flex here :)))))). As you can see some of the people have problems to make it reality ;), but we love the feeling when you can on the morning and entire egg is there, thx enjoy
0
Reply
Replying to @Printednest :
not a flex, I just grabbed the profile and hit a few buttons. The design is great, making it easy
1
Reply
Boosted
Print Profile
100% scale 0.2mm layer, 2 walls, 15% infill
It's very beautiful! Thanks!
The designer has replied
0
Reply
Epic!
0
Reply
cool, thx for prrinting and sharing
0
Reply
Printed twice. First time it printed flawless and it’s beautiful. The second print spaghetti at 84% what a letdown :( Love the model though and I will try again.
The designer has replied
0
Reply
tried again. spaghetti at 87%
0
Reply
ups. Wheen this happend to me, I have sliced model in bug layerr and prrinted the rest. Then with 3d pen cennected together. Also great DIY designs :)
0
Reply
Print Profile
100% scale 0.2mm layer, 2 walls, 15% infill
scaled it to 75% came out great looks good Prince nicely
The designer has replied
1
Reply
NICE! This is the smallest one ever made :-)
0
Reply
hello, it would be interesting to have a roof that could fit on it
The designer has replied
5
Reply
Hi, this is not a birdhouse, just a feeder. Eat and fly away. We also discussed it with local ornithologists :-D
1
Reply
Same, I’d love that. I’d have to put it in a spot where it would be exposed to rain a lot getting the seeds and stuff quite wet.
2
Reply
Boosted
Print Profile
100% scale 0.2mm layer, 2 walls, 15% infill
The fact that it prints without supports is mind blowing to me
(Edited)
1
Reply
Used a P1S for this print and come out very well. I used the STL file and followed the notes in the Description. No supports used made my brim at 40 mm as instructed. Standard white PLA with default settings besides the changes suggested in the notes. Solid print, my kids are going to love it!
1
Reply
Print Profile
A1mini 86%scale with Supports 0.2mm layer, 2 walls, 15% infill
Lovely model, printed beautifully. Being sent to my mother for Mother's Day.
The designer has replied
0
Reply
thx for rating
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.