Design Remote Holder
Copyright Claim
Design Remote Holder
Boost
9
28
11
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
3.7 h
1 plate
Boost
9
28
11
0
93
72
Released
Description
SIMPLE AND DESIGNED REMOTE CONTROL HOLDER, CAN SUPPORT 3 TV REMOTE CONTROLS AND SMARTPHONE ALSO
PRINTING INSTRUCTIONS:
- MATERIAL : PLA/PET-G
- NOZZLE SIZE : 0.4/0,6 mm
- LAYER HEIGHT: 0.2/0,3 mm
- VERTICAL SHELLS: 2/3
- INFILL: 15/20%
The object must be printed on its side as shown in the image
It can be printed without supports, if you want a better finish in the holes I recommend to put some supports as shown in the image
Comment & Rating (11)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice design holder
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
remotes can slip out sideways
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:my remotes have rounded bottoms and they slide to the side and out. if I had other remotes with flat bottoms I'm sure it would work great. the print was perfect, just didn't work for me personally.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld