Just got the same hex driver kit and this rack was perfect ! 
Thank you

Goodthrust

0.2mm layer, 3 walls, 20% infill

Hawke77

cover

hex drver rack_2c2558f8-4269-46cf-9131-a65deef7c051.webp

IMG_5506_b8977f7f-2feb-47a4-bd10-c9d8b977802f.webp

IMG_5505_51d93c65-8446-471a-98fc-2665ab7c14f2.webp

IMG_5504_ba851bee-2163-47cb-999c-7ba9a55fe6ca.webp

IMG_5503_f9e15c01-d862-4ba6-9cf6-0c50d3f9d40b.webp

plate_1.png

.20mm standard @BBL X1C  profile should be fine if you print it with PLA. &nbsp;I printed this on a Gold PEI plate, not the one shown in the photo.  Plate choice is up to you.  The cool plate should be fine. This is not a complicated design.  Support is not needed.  Maybe the holes won't be perfectly circular, but the tools won't know the difference.&nbsp;I used Sunlu in this case, but what you choose is not at all critical.  3 wall loops, 3 top and bottom shell layers and 20% infill (tri-hexagon) were my choices.  Keep it light!

I need a way to organize my hex bit/ Allen wrench drivers and keep them handy for those quick repairs and nozzle swaps. This can be screwed in to a surface or mounted with velcro on the side of the printer. If you screw it in, please be careful about screw placement and length. That would be your responsibility. &nbsp;The tools I found on Amazon: OFNMY 4pcs Hex Screw Driver Tools Kit. Just search for that and you will find them easily. Good quality and reasonable price

Hex driver tool rack

Global

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

RC Tools holder Hex drivers holder for IKEA SKADIS

Allen Driver Stand

Hex key holder

Pegboard Screwdriver Holder