Print Profile(5)
Description
DK barrel with wood grain textured surface. Everything is printed in parts and press-fit together with no glue necessary. Tolerances are snug so make sure your filament is well dried and calibrated.
Update:
- 8 Apr 2026 - Added Diddy and Dixie letters
6 Aug 2025 - By Request: Full barrel version now has an optional lid
- 5 Aug 2025 - By Request: H2D Max Bed Size Version - Reduced the wall thickness of the large size.
- By request: plain barrel version.
By request: Mug / koozie version
Instructions:
- Print the black bands twice (There should be room to double it in the App). I only put two on the plate so that it can fit an A1 Mini as well.
- Slide inner bands (wider diameter) on first, then slide on the top/bottom bands.
- The yellow pieces should snap into the red piece pretty easily.
- Then position the red letters so it wraps around the black bands and the triangle should snap into place.
There are 3 versions
- Full barrel container version where the interior is fully hollowed out
- Planter version that's sized to fit my 100mm / 4" self-watering insert (below)
- Full Barrel Looser fit version that should tolerate scaling better. You may need glue to secure it. The print profile has it scaled down to work as a pen/pencil holder.
Other Designs
Boost Me (for free)
If you're feeling generous and like what you see, Buy Me a Coffee or Send me a tip.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (415)