Bottle Rack
Print Profile(2)
Description
Bottle Rack - Now with top cover for additional storage.
This design was created to provide a low weight bottle storage solution.
The hole diameter is approximately 94mm so should fit most bottles. The height is 107mm and the width is 117mm (7mm is the pin length, so for as an example, the rack in the images is 207mm high and 447mm wide)
The print profile uses PETG with PLA support interfaces (which means it'll require an AMS). This allows the interfaces to fit together much more precisely and without the need for glue. This method only produces about 4.5g of waste and adds 15 minutes to the print time.
The model could be used as a wine rack, though I have not tested it for the purpose and you may need to use glue to ensure it's structurally secure.
Please let me know if you have any feedback on the profile.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (35)