Sunflower Plant V1

Copyright Claim

Sunflower Plant V1

Boost
147
218
13

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
8.1 h
7 plates
5.0(11)

Boost
147
218
13
0
327
287
Released

Description

After creating my piranha plant design, I was on a kick to put together another loved video game plant.

You could probably guess where I got the inspiration.

I designed the eyes to follow you, no matter where you’re standing in the room. The black part of the eye is inset, while the white part slightly extrudes out.

This design can be printed with your basic single extruder printer. While the piranha plant designs found below, will need an IDX or duel extruder printer.

Free - https://www.thingiverse.com/thing:5426723

Different Bases - https://cults3d.com/en/3d-model/art/piranha-plant-v2

There’s nothing to complicated about printing this design other than the leaves. I would suggest starting your build there.

I aligned the flat parts of the leaf 1 right and leaf 1 left together on the build plate and used a brim to not only have better bed adhesion, but to keep the parts together until I was ready to assemble the plant.

I printed both parts of each leaf together, then moved on to the next leaf, so I didn’t get pieces mixed up.

Leaf one has one notch cut out, two has two notches, etc. You can check the description of the files to position them correctly in the stem.

Assembly should be straight forward, but if you have any questions, just let me know.

Thanks for checking out my design!

Happy Printing!!

You can follow me on instagram, https://www.instagram.com/pla.n.pa/

to find out what I designs I am currently working on

If your interested in selling prints of my designs, become a Patreon supporter here…
https://patreon.com/planpa3d

Category: Art

Comment & Rating (13)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Easy too Print and assemble. it's very cute. Printed in single color and handpainted it. Thanks. 🥰
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice one,ty
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Go big, or go home?
(Edited)
0
Reply
this model is great! thank you
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Coloured and divided parts on different plats
object labeled dirt is actually the back of the flower and dirt is the same as the pot color.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.