Mario Mushroom Money Tree Planter

Copyright Claim

Mario Mushroom Money Tree Planter

Boost
142
225
7

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
15.6 h
6 plates
4.1(7)

Boost
142
225
7
0
203
162
Released

Description

If you like this design, and wanted more, check out the stash pot version of it here.. https://cults3d.com/en/3d-model/art/mario-mushroom-stash-pot

Switch game organizer version available here https://cults3d.com/en/3d-model/art/mario-mushroom-secret-switch-game-organizer

 

Designed in Fusion 360 back in 2020

I wanted some planters I know I could sell in my local art galleries this coming holiday season, so I put in the leg work and designed my own.

Used my Tenlog Duel head printer to create one print of the top pieces. Just about any color combination should work.

Printed out the other pieces separately and glued them together, should be self explanatory.

 

The original design is rather large, don't think I ever did print this at 100%

The Planters pictured are at 80% scaled down. I wouldn't go too much further down without checking on the small eye centers in Cura, and seeing if they are going to print right for you. In fact I do suggest printing the eye centers at 1% or 2% smaller to make sure they will fit. Everything else came together perfectly.

Bottom and top main parts where printed with 4 walls, 6 bottoms/tops at .2 res in Cura

Added extra shell material to help insure planter will hold up with time. Then not only glued, but PLA welded the two main pieces together with a soldering iron to ensure strength in the joining parts.

Also included the Mario coin décor. Found this printed best split in two pieces and then glued together. Used pipe cleaners to hang them to the trees.

Any questions let me know..

Thanks for checking out my design.

If your interested in selling prints of my designs, become a Patreon supporter here…
https://patreon.com/planpa3d

 

Comment & Rating (7)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
the spots on the mushroom cap were a bit off and quite a bit of shaving off was needed to get the pieces to wedge in.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Die Pilzhauben und die Unterteile sind super geworden. Die Pilzkopfpunkte auf der Seite zu drucken ist keine gute Idee, da das den Rand sehr unsauber macht. Besser ich hätte sie liegend mit Support darunter gedruckt. Die Augen getrennt vom „Augenweiß“ zu drucken würde ich auch nicht nochmal machen - ist a) sehr fummelig und b) habe ich es noch nicht rein bekommen.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
having fitting issues
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great print, bottom is a bit fuzzy
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Encajan bastante mal las piezas.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.