UPDATED: based off the newly changed model of the original

The “8 mm Offset Snap” creates an 8 mm gap between your Multiboard and a surface when using the “off-a-surface” mounting system. This piece usually goes on the corners of your Multiboard. This version has a recess to accommodate a piece of 3m VHB (Very High Bond) tape.

**This file is one object, in the Bambu app you can select as many copies as you want and it'll fill up the plate with as many as can fit.

Tape used: https://www.amazon.com/dp/B08T1HB5LJ

This is a remix of the original “8 mm, T Mounting Offset Snap - DS Part A” (https://than.gs/m/974340) by Keep Making.

The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm.

-----

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io