Search models, users, collections, and posts
Milwaukee Charger Mount - Ikea Skadis
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
40 min
1 plate
Open in Bambu Studio
Boost
81
365
3
2
303
90
Released
Description
This is a sturdy mount to attach an M12 or M12/M18 combo battery charger to your Ikea Skadis pegboard. The mount uses heat inserts and M4 socket head screws to create an adjustable and sturdy mounting point for your charger. The plate is also mounted to the Skadis board with printable t-nuts to create a strong but easy mounting solution.
Below is the list of parts I used:
- 4x Skadis T-nuts: I used these - Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws. They work very well and print easy
- 4x M3 x 16 Flat head screws
- 2x M4-0.7 x 4.7mm heat inserts. Any heat insert 5mm long should work just be aware of hole size
- 2x M4-0.7 x 6 or 8mm long socket head screw
The inner set of vertical holes on the plate is used for the M12 charger.
The outer set of vertical holes on the plate is used for the M12/M18 combo charger
An STL, STEP and 3MF are provided. The 3MF has added modifiers for adding extra perimeters to the holes for added strength.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (3)