Sorting box by 3D prints and gifts

3D prints and gifts

Tools>Organizers

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

16.4 h

8 plates

4.9(7)

X1C, 0.2mm layer (smooth), 4 walls, 15% infill

11.6 h

8 plates

Open in Bambu Studio

Boost

104

192

216

157

Released

Description

A box where you can keep different things in and because of the many inserts you can divide it as you like. here is a link how to connect the clamp to the lid: https://www.youtube.com/shorts/asWc3n-W0VM i printed mine with a 0.4 nozzle and 0.2 layer height. The clamp and the box will need a little support.

Comment & Rating (13)

@83johnrowe

WORD OF WARNING The trays dont actually fit with the lid on cos of the 4 large square lugs on the inside of the lid. MAXIMUM HEIGHT OF TRAYS needs to be a combined total o 55 mm (possible 60 at most), not 70mm as per the files, even the provided tall trays are TOO TALL for the box standardly. designers photos either show a taller box or smaller height trays. so either max combined tray height of 55mm or bring the height of the box up to allow for the trays as they are.

The designer has replied

@printsandgifts

thank you to let this know, I will check this immediately and if it is correct i will adjust them and upload the new files.

@printsandgifts

I measured the inside heights of the box, lid and as you will see the box is 57mm and lid 13.9mm what in total makes 70.9mm The small box is 35,25mm x 2 is 70.5mm so there is still 0.4 over, the tall ox as you can see is also 70.5mm. I also measured the the other sides and they also seem to be good.

@83johnrowe

Replying to @printsandgifts :

while the heights are correct, the 4 large blocks you have to support the lid locks affect the height as they make contact with the inserts and none of the height from the lid is useable

(Edited)

@LucynaKushinada

Print Profile

0.2mm layer, 3 walls, 15% infill

nice

@backtheweb

Print Profile

0.2mm layer, 3 walls, 15% infill

Thanks!

@user_955836043

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@Fruit3D

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_3733930946

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_3599783527

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1382901796

Print Profile

0.2mm layer, 3 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.