Testing the limits of hueforge and if can create a low poly style.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Overture Black
- PLA PolyTerra Charcoal Black
- PLA Overture Cement Gray
- PLA+ Sunlu Grey
- PLA Overture Light Gray
- PLA+ Sunlu White
Swap Instructions:
- Start with Black
- At layer #6 (0.56mm) swap to Charcoal Black
- At layer #7 (0.64mm) swap to Cement Gray
- At layer #8 (0.72mm) swap to Gray
- At layer #14 (1.2mm) swap to Light Gray
- At layer #16 (1.36mm) swap to White for the rest.