This is a knife holder for small snap off knife 9mm blade

Printing tips:

I used Bambu Labs Basic PLA with standard settings other than these:

0,20mm layer height

Strength:

• 4 Wall loops
• 5 Bottom shell layers
• Gyroid Sparse infill pattern

Speed:

• 80 Outer wall
• 200 Inner wall
• 80 Top surface

Support:

• Enable support

Others:

• No Brim

Make sure you have a good grip on the build plate. I use Textured pei plate, with temperature 65

The design process:

I saw GizmoTheKing knife holder

The size and attachment didn't work for me, so I remixed it in Thinkercad

It uses @Rod_21807 Skadis attachment.

Thanks to the orginal designers

Sizes:

• Height: 44mm
• Width: 19mm
• Depth: 37mm (47,31 with the pegs)
• the hole are 9 x 16,80mm, and the depth is 40mm

I'm just a hobbyist, trying to make some things, not a professional designer

(Please keep this in mind if you post a review)