Two-sided magnetic door catch
Print Profile(4)
Bill of Materials
Description
Magnetic door catch, with two sided main part. The secondary counterpart can be placed where you want the door in open position. (see the gif)
The main part depth is 10 mm, as in my area, most of the aluminium net doors has 10 mm depth (or close to 10mm) as slim design.
Variants for 2 magnet sizes: 8 x 2 mm or 10x2mm
And 2 variant for the main part:
3-3 or 6-6 magnet on each side. Depend on how strong you want it. (the counter parts always just 3 magnet per part)
3 mm mounting holes, can be used small wood screws or M3 bolts.
The magnet holes designed as press fit, but the center magnets always has less friction, so a few drops of glue recommended to keep them in place.
Print support recommended but not required, depend on your printer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)