Sliding Puzzle Year of the Dragon
Copyright Claim
Sliding Puzzle Year of the Dragon
Boost
45
72
10
Print Profile(3)
0.16mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
0.15mm tolerance between blocks - 0.16mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
0.20mm tolerance between blocks - 0.16mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
Open in Bambu Studio
Boost
45
72
10
0
136
34
Released
Description
This sliding puzzle is completely designed by me. It's important that your printer is well tuned so the blocks don't stick to each other.
Print in place, so no assembly required.
After print the block can be a bit stuck and stif. They are easily separeted by moving them.
Update 16-1-2024:
- Added two extra profiles: 1 with 0.15mm tolerance and 1 with 0.20mm tolerance between blocks. It depends on your printer calibration which one is best for you.
Comment & Rating (10)
All
0.15 is better, not easy to fall off
The designer has replied
0
Reply
Nice! Thanks for letting me know.
0
Reply
Don't use the textured PEI plate. The blocks of the bottom layer are stuck and very hard to separate.
Will try smooth plate and see how it goes.
The designer has replied
0
Reply
That's strange, I don't have that issue. But thanks for your message and please let me know if it is better with the smooth plate.
0
Reply
Replying to @Mr.Jay
My fault... It turns out the bricks can be easily separated by just pressing them on the other side. Nice job!
1
Reply
Replying to @arthur.tang
thanks for the update!
0
Reply
Can you make a version with tighter tolerances? Easily falls out of the frame
The designer has replied
0
Reply
strange, I have no problem with the tolerances and they do not fall out. But I added some profiles withdifferent tighter tolerances.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.15mm tolerance between blocks - 0.16mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld