Balloon Dog by The Crafty Maker

The Crafty Maker

Art>Sculptures

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Optimized (Standard) - VLH (Variable Layer Height)

2.8 h

1 plate

4.8(172)

50% Scale, 0.2mm layer, 3 walls, 10% infill

58 min

1 plate

4.9(41)

0.2mm layer, 2 walls, 15% infill

2.6 h

1 plate

4.6(35)

0.2mm layer, 3 walls, 15% infill, 195% scale

9.4 h

1 plate

4.4(10)

Boost

430

677

272

1.5 k

1.8 k

Released

Description

A balloon dog sculpture.

The incident of the broken balloon dog sculpture inspired me to make a 3D model of that piece of art.

It was a good sculpting exercise and was perfect to refine my modeling skills.

Supports needed when printing. Take care when you remove supports from the nose, it is a fragile part.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller Patreon subscription.

Comment & Rating (272)

@rach_eva

Print Profile

Optimized (Standard) - VLH (Variable Layer Height)

Printed in silk with settings adjusted appropriately. Outer walls 60 mm/s. Supports removed easily with minimal to no damage.

@oliver3D

Print Profile

Optimized (Standard) - VLH (Variable Layer Height)

nice model. love it. came out perfect

@oliver3D

Print Profile

50% Scale, 0.2mm layer, 3 walls, 10% infill

Thx for sharing. Love it.

@lordmarinade

Mine printed neat with my custom tree supports, maybe they could have smaller air gap but it's fine. Golden balloon pupper 0,2 layer height 2h38min with A1

The designer has replied

@TheCraftyMaker

🤩

@Forestergump

Print Profile

50% Scale, 0.2mm layer, 3 walls, 10% infill

Cute Lil print and 50% is a great size for a tabletop piece

@achavez16313

Print Profile

50% Scale, 0.2mm layer, 3 walls, 10% infill

printed well used petg as interface supports came off clean. might print a few minis to give as gifts. first print with my ams also!

@Matthew_murray

Print Profile

50% Scale, 0.2mm layer, 3 walls, 10% infill

Fantastic print profile. Printed a whole army of these bad boys scaling it up and down to many different sized. Big hit with people- although very frustrating if the tail snaps off.

@styxfanerin

Print Profile

Optimized (Standard) - VLH (Variable Layer Height)

turned out really cool! very smooth and easy print!

@BLESS3DPrints

Print Profile

Optimized (Standard) - VLH (Variable Layer Height)

I love the print description, its very accurate and made for a REALLY great print!

@MonteVerdePrint

Print Profile

50% Scale, 0.2mm layer, 3 walls, 10% infill

1 click profile worked great on P1S. Note ta is broken in image from small drop

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Comment & Rating (272)

License

Related Models

Cute Balloon Poodle and it's doghouse

No Dog Poop Sign

Dog Coasters

Bobble Dog