Print Profile(1)
0.2mm layer, 2 walls, 15% infill
42 min
1 plate
Open in Bambu Studio
Boost
11
20
5
0
57
59
Released
Description
This broom holder can hold three brooms. I made it considering different brands and diameters. It should fit the most common sizes.
You can attach some velcro behind the plate and on the wall, or use the two holes at the side of the plate to screw it to the wall.
Instructions
Download the .stl file to print the broom holder as it is, or download the .skp file to modify it with Sketchup.
Category: OrganizationComment & Rating (5)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
the print quality great but didn’t realize they are too close to really put more than 1 item
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Druckqualität gut aber in PLA unbrauchbar weil es gleich bricht
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Really useful
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
le sedi sono molto larghe per i manici delle scope
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld