dhiertz

0.2mm layer, 3 walls, 15% infill

Benkrout

cover

IMG_0910_4105896d-c7bc-482e-a51b-cccc1c88fa4e.jpeg

IMG_0911_45b5f6c7-260d-4c3c-886a-100e695c827c.jpeg

IMG_0910_e35afdc6-8f8b-4dff-9b15-5861ea6e31f6.webp

IMG_0913_a9ee5541-3da9-4c99-8f34-33f473b42991.webp

plate_1.webp

IMG_0911_b02e5408-2e77-473a-94e4-0a1444cc3958.webp

plate_1.png

<p>P{rint profile includes some modifications to make it fit perfectly.  Made to print in PETG with PLA as support interface.  I added a bit of extra PLA to connect the bottom layers of PLA so they wouldnt dislodge from where they sat on top of the PETG.  I was also able to print this entirely without supports as well, but there was some slight droop in the overhang which made the part slightly too tight of a fit, but nothing a little sanding on the underside couldnt fix.</p>

<p>I needed a cover to protect the contacts of my Makita 18v batteries so I fabbed one up in Fusion360.  Super nice fit.  </p>

Cover protector for Makita 18v battery

Global

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

Makita 18V Battery Holder (Rotated Logo)

Makita 18V Battery Holder

Makita 3x 18V Battery Holder

Makita 3x 18V Battery Holder (Rotated Logo)