Multi-Brand Stylus Pen Holders

Introducing the carefully designed 3D model of the stylus pen storage box! Three exclusive sizes are available this time, precisely tailored for different brands of stylus pens, creating a personalized storage space for your stylus pens. The storage box not only provides a secure storage environment for stylus pens, preventing the nib from wearing and the pen body from scratching, but also keeps your desk tidy and organized in an instant.

The specific compatible sizes are as follows:

apple pencil: length 166mm, diameter 8.9mm
Huawei M-Pencil: length 160mm, diameter 8.9mm
surface stylus pen: length 145mm, diameter 9.5mm

Printing Tips
Before printing this 3D model of the stylus pen storage box, be sure to prepare properly to ensure a smooth printing process. First, carefully clean the print bed to remove dust, oil, and other impurities on the surface, keeping the print bed clean. After cleaning, it is recommended to evenly spray a layer of glue. The glue can effectively increase the adhesion between the printed parts and the print bed. Especially for parts with a small contact surface, it can prevent them from falling off due to insufficient adhesion during the printing process, improving the printing success rate and the quality of the finished product. With these preparations, you can start your printing journey better!

Printing Tips: As some parts of the model have a small contact surface with the heated bed, they may detach from the heated bed during the printing process. To increase the printing success rate, please clean the printing plate with dish soap and spray glue before printing. Using a low - temperature warming printing plate can significantly enhance the printing success rate.

Feel free to leave a comment if you have any suggestions or questions about the model. When problems occur, please tell apart whether the issue is caused by the model itself, the printer, the filament, or improper operation and installation on your own part. I will block users who blindly attribute printing failures to the model and leave a one-star rating simply because they are unable to troubleshoot and fix problems by themselves. Such behavior greatly undermines the efforts of open-source creators.

有任何关于模型的建议或疑问，欢迎评论留言。出现问题时，请先区分原因：是模型本身、打印设备、耗材，还是个人操作与安装不当造成的。对于自身没有排查和解决问题的能力，却一味将打印失败归咎于模型并给出一星差评的用户，我将进行拉黑处理。这类行为会严重辜负开源创作者的心血与付出。