Holder to hang two Oral B toothbrush heads without the water running into the heads. A glass can be placed under the holder.

I made a model package that is attached to a board with the bracket and a model package that stands on the table. There are suitable models for glasses with a diameter of 50 - 60 mm. Other diameters are also possible on request.

Improvements to V1:

• added an own bracked model
• better ratio of stiffness to mass
• optical improvements
• added model package to stand on the table

Printing parameters:

• Material: PLA / PETG
• Layer height: 0.2 mm
  → Maybe lower for the screw and the bracket due to the thread. Depends on the printer quality. Mine worked fine with 0.2 on a BambuLab X1C.
• Support only needed for the bracket (see last picture, overhangs in the stand max. 60°)