Door Gate Barricade Brackets by 3DTackleShop

3DTackleShop

Hobby & DIY>Other Hobby & DIY

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 10 walls, 70% infill

Designer

1.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Heavy Duty Security Brackets 6mm thick for a 2x4 Lumber.

Originally designed to keep my fence gate from opening during high wind storms.

Print with 10 walls and 50%+ infill. PETG or stronger material recommended (PLA won't last outdoors).

Screws #14 or smaller 1-3/4In

☕️ Be my caffeine patron! A little coffee goes a long way in keeping my creative gears grinding. Click to brew some support! #CoffeeForCreativity

Comment & Rating (7)

@cselby

i love the idea but i tried 2 times and it failed at the same spot both times :(

The designer has replied

@Anasrocks

what's your print orientation ?

@cselby

it was on the side.

@cselby

Replying to @Anasrocks :

ok i found the problem and it was not your model. I found that the infil used was causing problems with the A1 and the A1 mini. if you use the standard infill it drags the wall and knocks over the model. I printed it fine on my ender 3. FYI if you are using a A1 just change the infill or increase your zhop.