Printed Mini Arcade Machine Screen Infill Piece by ashgardiner

ashgardiner

Toys & Games>Other Toys & Games

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

35 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

this is an infill piece to correctly space the screen for the Printed Mini Arcade Machine by Archer https://makerworld.com/en/models/94544#profileId-102047

i printed it in the accent color which looks pretty nice. i have sized it just slightly under by less than .5mm so it fits nice with a tiny bit of room for fine adjustment or to account for folks whos printer isn't the most accurate. i have included the fusion file if you want to edit to tighter or looser dimensions although its not necessary, just watch out as it is not a symmetrical piece between the inner and outer so adjust with care.

arcade machine

arcade

Comment & Rating (8)

@ashgardiner

Last night i managed to get everything functioning, i powered up only to test as i am still waiting on final bolts to complete the housing so i used tape in some places. some how i found myself playing Sonic and Streets of Rage for 3-4 hours i forgot how addictive these old games are. Thanks @Archer my daughter is going to love this, i would have lost my mind if i had something like this as a kid back in the 80's

The designer has replied

@SPIDER0211

Awesome. Mine is the same color. Just waiting on power supply and now im printing your spacer. Was wondering if I had ordered wrong screen or it was a design. Glad to know im not the only one.

@ashgardiner

Replying to @SPIDER0211 :

i also cut the little metal tags off mine with a dremel too as they were stopping a perfect fit . im almost 100% finished now, just got to make the marquee for the top and im done. i also soldered my power wires to the boards and used the gpio on the pie to feed the 5v in as i didn't want the connectors to fall out and i didnt want to chop up a usb c cable.

@SPIDER0211

I finished mine. I printed the bezel and forgot to put it in. Not taking it apart now. hahaha. I also made a multicolor lithophane for my marquee. Makes this litttle arcade fully printed frame.