BAMBULAB SCRAPER VERSION 2.0 UNOFFICIAL - BIG IMPROVEMENTS - MAGNETIC
Copyright Claim
BAMBULAB SCRAPER VERSION 2.0 UNOFFICIAL - BIG IMPROVEMENTS - MAGNETIC
Boost
38
46
19
Print Profile(2)
0.12mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.2 h
1 plate
Boost
38
46
19
0
219
83
Released
Description
When I got the Bambulab, and I printed the scraper I was impressed at first… then dissapointed at a few features. #1 the Magnets they come with are horrible. They barely stick to anything… so mine requires your choice of 7x3mm Neodynium Magnets… one model uses 2, one in the top and one in the bottom. Then the “Double” version uses the 7x3MM magnets stacked, so this one requires 4 total magnets. This seemed to work really good for me.
The bmabulab printers all have a welded steel chasis under the aluminum or plastic or whatever. I have found I love sticking mine to the right of the door and man they stick big time.
I have a “holster” like the original Bambulab scraper… but I haven't found a good use for it with this scraper.
Comment & Rating (19)
All
Print Profile
0.12mm layer, 2 walls, 15% infill
had to glue down magnets to keep them from sticking to the nozzle but printed great otherwise
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
GOOD
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
huge improvement over the standard bambu scraper
0
Reply
make a 6x2 mm version plzz
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
infill should be stronger
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
print came out clean. no adhesion issues noticed.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld