PTFE Extension Adapter 4mm
Simple adapter to extend your 4mm outer diameter, 2.5mm inner diameter PTFE tubes for longer reach.
Instructions & Requirements
- 0.2 nozzle is required!
- Please use purple glue since the parts have small footprint on the bed.
- Profile is optimized for the best print result.
- The adapter has a custom support adhesion.
- After print, please use a flush cutter to remove the support.
Profiles
Disclaimer
Print quality is base on your filament brand, filament parameters and environment; please take research for the optimal printing quality. Profiles are optimized to ensure text is clear, minimal banding and minimal ghosting.
Updates
Version 1.0