Dimensions (LxWxH)

59,37 x 66,97 x 100 mm (100% scale)

Basic information

The spooky season is here again! Ghosts, zombies, witches, and skeletons are roaming the streets under the ominous light of the Moon, with the sound of rattling bones and ghastly screams, so you're better off staying home, unless you want to risk a close encounter.

If you want to get yourself into the chilling mood of Halloween, printing ghosts will definitely help. 

For extra effect (and spooks), you can print it in a glow in the dark filament, or add a LED light inside of the ghost. 

Files information

I've included one file in the .stl format.

Material

 PLA

Layer height

<0,2 mm

Infill

≥0%

Support

None. The model was designed not to require any support material.

Scaling

Scaling is possible, but mind the first layer adhesion when downscaling. The smaller the print, the harder it will be getting it to stick. If you print a significantly downscaled version of the model, definitely consider using some adhesive, or a brim. 

Orientation

Default, bottom part on the buildplate

Adhesion aid

The contact area with the buildplate is fairly small (about 3 perimeters), so make sure your adhesion is sufficient. If you have an old buildplate with a degraded print surface, or if your printer suffers from poor first layer adhesion, use an adhesive, or a brim to make the contact area bigger. If you don't want to stuggle with removing the brim afterwards, set it to inner brim only. You don't have to do any post processing that way.

In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue each specific update was adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not. 

If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.

There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.

My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.