See all my Gridfinity designs here

Wanted a tray to hold an AC remote, so whipped this up.

It's 1x5 in Gridfinity terms.

Tray inner is 187 long x 25 wide x 20mm deep.

There are two print profiles:

1. A standard version with 2 wall loops. This is a quicker print, but if you care, in a bright environment light shines through the walls, and you can see the infill pattern easily. Doesn't matter in a drawer or dark office etc.
2. Thicker walls (5 loops) so that light doesn't shine through, but longer print time.

Note, if you're looking for a model where each side rim is the same thickness (this one isn't!), then look here.

Update 2024-04-01:

Magnet holes are a better press-fit.