Easter Coaster SET

Here's a cute set of coasters for your Easter events.

Designed to be printed in multi-color, with only 4 colors (or more if possible, as shown in the photos).

All the details are separate pieces so you can paint them with your slicer however you like.

To color it, simply separate it into parts using your slicer and then assign the color you want to each piece.

I've uploaded two printing profiles, so you can choose based on your equipment:

1. with two AMSs to use 8 colors (this is the one you can see in my photos)
2. with a single AMS to use 4 colors.

Both options will look great

Print Settings

Material: PLA / PETG

Layer height: 0,20 mm

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10-12%

Perimeters: 2

Supports: no

Required printing technology: multi-color system

You can see my other models here:

Diego Alvarez | Published - MakerWorld

________________________

If you like my designs and want to sell physical prints or support me , you can check out my patreon for commercial license and exclusive models

https://www.patreon.com/meafdesigns

________________________