cWall Hook

🧥 cWall Hook – Minimal Wall Hook with Dual-Circle Design

A clean, modern wall hook with two geometric cutouts – perfect for coats, bags, headphones or towels. Mounted with two 2 mm nails, it sits flush against the wall and holds strong while looking sleek.

🖨 Printed on: Bambu Lab P1S

• Optimized for durability and aesthetics.

🔧 Print Settings

• Layer Height: 0.2 mm
• Perimeters: 4
• Top/Bottom Layers: 5–6
• Infill: Gyroid or Grid, 60–80% (100% for max strength)
• Material: I used PLA, but PETG is recommended for toughness
• Speed: 40–60 mm/s
• Orientation: Flat back on the build plate
• Top Surface Pattern: Concentric for a refined, circular finish
   

🎨 Finishing (Optional but Recommended)

• Light sanding
• Primer coat
• Painted with DOiT Antique Steel 781 (Antique Silver)
• Sealed with matte clear acrylic coat

This combo gives a classy metal-like appearance. Let layers dry fully between steps.