Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PLA Kingroon Yellow Transmission Distance: 5
PLA Kingroon White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.