Bambu Fan
Copyright Claim
Bambu Fan
Boost
15
16
9
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate
0.2mm layer, 2 walls, 15% infill
3.7 h
3 plates
Boost
15
16
9
0
63
41
Released
Description
Model
A small fan width 240mm.
Model designed with Onshape, available in https://cad.onshape.com/documents/6edea336178226a7eb2792df/w/57a3614702c821e5bf9432b6/e/f18792434e65ef8f0eac1cf0
Recommended!
0.2mm layer or smaller.
A perfectly leveled bed or mesh ABL is required because it has a large thin surface.
The 3mf is painted with Bambu Studio, 2 or 3 colors print is highly recommended. Looks much better.
Comment & Rating (9)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Good design and was easy to print.
1
Reply
a more long hand hold
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
a little thin (as necessary) and results in slight transparency in back of fan
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed using generic PETG filaments turned out pretty good some small issues with stringing mostly due to wet filament. but the print profile still works with Petg no problem.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld