Speed Designer

Magnets

cover

Gif Rutsche klein_(1).gif

Gif Rutsche klein.gif

Magnets.jpg

Render quer.jpg

Behälter closed.jpg

plate_1.png

Printplate 02.jpg

0.2mm layer, 2 walls, 15% infill

20250421_185803.jpg

mitLöcher.jpg

20250409_225401.jpg

Hole variant 0.2mm layer, 2 walls, 15% infill

plate_2.png

H2S no color 04 nozzle 0.2mm layer, 2 walls, 15% infill

H2S no color 0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

TangoTaker

IMG_0189.JPEG

This is the H2D version adapted for the H2S to enable easy printing from the Handy app without the “incompatible printer” error.&nbsp;0.2mm layer height15% infillprint includes both the container and the slide on one plate.&nbsp;AMS for the logos and BBL lettering, just like the original.

H2S Version, 0.2mm layer height, 15% infill, container+slide

EinUrElf

20250429_224136.JPG

20250429_224122.JPG

20250430_120927.JPG

20250429_224241.JPG

If you want to print this model faster, you can use a 0.6 nozzle. The quality is really good with the larger nozzle.&nbsp;I also printed the slide (which is not included in this print profile) with a 0.6 nozzle in 1.9 hours.Since a print profile with a 0.6 nozzle is considered a duplicate,you&#39;ll need to download the Designer&#39;s print profile and change the nozzle to 0.6.I didn&#39;t change any other settings.&nbsp;Printed with: Bambu Lab PLA Basic  Gray 10103 Bambu Lab PLA Basic Black 10101&nbsp;Build plate used: Smooth PEI Plate

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Delboy3d

photo_2025-06-05_17-13-37.jpg

photo_2025-06-05_17-13-49.jpg

Profile For using PETG HF with Support in same material.&nbsp;0.2mm layer Height&nbsp;Right Nozzle H2D&nbsp;

Veezy

PXL_20260106_152521825.jpg

Adapter to use 8X2MM magnets<ul><li>0.2 Standard profile with 10% infill PETG  </li></ul>

Adapter 18mm to 8x2mm Magnets

Slizz

71719320-a928-11f0-b307-3994d4adb5cb.jpg

It&#39;s a adapter to match 10mm magnets instand of the original 18mm

Adapter 18mm to 10x5mm Magnets

Logo (AMS)

No Logo (No AMS)

BigTeddy

20260421_164657.jpg

20260421_164639.jpg

I really liked how slim this model was.&nbsp;Since the design running across the back holes, I printed it with a perforated profile, but I ran into a problem where the filament got caught.&nbsp;I solved it by applying aluminum tape as suggested in the comments, but I wasn’t happy with the part covering the holes.&nbsp;So, I cut out a section at the top to ensure smooth airflow. The aluminum tape trick is still a good method, so I’m still using it.&nbsp;It consists of two plates: one with the logo and one without.I hope this helps anyone who needs it.

Add a cutout to the top. (For air circulation)

RiverRaid

poop.jpg

0.6 Nozzle, 0.3 Layer Height, 3 Wall Loops, 10% Cross Hatch Infill, Prusament ASA Galaxy Black

1 Plate,0.6mm nozzle, 0.3mm layer, 3 walls, 10% infill , ASA

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Schöne funktionelle Poop chute inklusive zwei Containervarianten für deinen H2D und den baugleichen H2S.&nbsp;Ich habe mich bewusst, für die nicht schraubbare Lösung entschieden, da der H2D(H2S nur sehr kurze und kleine Schrauben auf der Rückseite aufweist.Du brauchts nur 4 simple und billige Magnete im Durchmesser 18mm und 5 mm Dicke. Dadurch kannst du jederzeit die Rutsche einfach abnehmen oder wieder einhängen.<a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.de/dp/B0CC1F5N91">https://www.amazon.de/dp/B0CC1F5N91</a>&nbsp;Wichtiger Tipp: Druckt bitte die Chute unbedingt in PETG, damit die heißen Poops nicht festkleben!&nbsp;Auf vielfachen Wunsch jetzt wahlweise mit Kühlungslöchern.&nbsp;Der Druck ist super einfach.&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. Thank you!</boostcontent></boostme>

Nice functional poop chute including two container variants for your H2D and the identical H2S.&nbsp;I consciously opted for the screw-less solution as the H2D(H2S only has very short and small screws on the back.You only need 4 simple and cheap magnets 18mm in diameter and 5mm thick. This allows you to easily remove or reattach the chute at any time.<a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.de/dp/B0CC1F5N91">https://www.amazon.de/dp/B0CC1F5N91</a>&nbsp;Important Tip: Please print the chute exclusively in PETG so that hot poops do not stick!&nbsp;By popular demand, now optionally with cooling holes.&nbsp;The print is super easy.&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. Thank you!</boostcontent></boostme>

H2D / H2S / H2C poop chute

ASIA

Print Profile(13)

Bill of Materials

Description

Comment & Rating (1336)

License

Related Models