Gold Dragon Hueforge NO AMS Needed by RP47 Designs

RP47 Designs

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

Designer

7.5 h

1 plate

4.8(16)

NO AMS Pauses with manual filament changes 0.08mm layer, 1 walls, 100% infill

Designer

7.4 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

123

249

535

125

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

200mm x 200mm.

You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a three color Hueforge, it will require two pauses with manual filament changes.

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA Overture Silk Gold Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Gold
At layer #28 (2.32mm) swap to White for the rest.

Comment & Rating (33)

@ZonumGus

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

came out great thank you

@MakerCameron

What brand/color is that gold filament? Looks great!

@ZonumGus

it’s Bambus silk gold

@MakerCameron

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

Pros: Looks Awesome Con: One side of print is chopped off The first person I showed it to said "that's so cool!"...followed by..."Hmm...but something's wrong". That "something wrong" is that the right side is a bit chopped off :-( So the dragon and circle don't look exactly centered. It's one of those small but important distractions that take away from an otherwise spectacular model. I'd gladly spend the filament and another 7.5 hours to reprint if you fix this (and give you 5 stars)

The designer has replied

@RP47

Wow! I totally didn't notice that, not sure when or how that happened. Thank you for making me aware. I have fixed the model and reuploaded it. I will post new pics once my printer is free to print the fixed version! Thank you again!

@MakerCameron

Replying to @RP47 :

Thanks for fixing. I'll look to reprint it soon!

@user_2847082699

Boosted

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

This is the second print for me. Each time something happened on that left-edge side. Not sure if it was my plate or my filament (all Bambu Labs). Being uncertain is the only reason I did not give it five stars. Great print. My family loves it. 👍🏾

The designer has replied

@RP47

The cooling fan is blowing hardest on that side, usually I use the generic profiles because the bambu ones are a little fast for doing hueforges in my opinion. That or you can try centering the print. I actually don't use the prime tower at all anymore. Totally forgot some of my older profiles still have them. I would turn it off and then center the print. It will likely come out cleaner.

(Edited)

@user_2847082699

Boosted

Replying to @RP47 :

Will try that. Either way the print looks great. My wife had it displayed in her favorite room. Happy wife, happy life! 😊

@Kirans

Great but not centered even in the new version (finished = old version on picture, stopped in middle = newer version) : It's require around 1mm more black on the right to be really center ! I will print again if you put a new version ! Nb : Be careful, sliced files have the old/bad STL version !

@AVGCZ2

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

perfect

The designer has replied

@RP47

Looks great!

@Agent_iQ

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

Very nice. Thank you.

The designer has replied

@RP47

Turned out great!

@entong.chen

What is the Chinese mean here? Is it a character?

The designer has replied

@RP47

It has no meaning. I added them thinking they were actual characters but I was mistaken. They have since been removed. My apologies.

@Drakond

Boosted

Print Profile

NO AMS Pauses with manual filament changes 0.08mm layer, 1 walls, 100% infill

printed in tpu, still came out really well. love the detail actually it came out amazing (I held it up to the light)

(Edited)

@user_570132757

Boosted

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

Pretty good I printed it with bambu handy only, didn’t change settings

(Edited)

@linger.lukas

Print Profile

AMS Filament Changes 0.08mm layer, 1 walls, 100% infill

The designer has replied

@RP47

Wow the red looks great! Cool color choice!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.