H2D / H2S Super Lube Applicator Caps + Box
Print Profile(14)
Description
Boost Me (for free)
Thank you for your support!
UPDATE: added H2C Version with additional Tip for Vortek linear rods.
These oil applicator caps will help you apply oil to the linear rails and rods of your Bambulab H2D, H2S or H2C 3d printer without getting oil on the belts. They fit standard 4 oz / 118 ml Super Lube / Synco Lube bottles (51004 / 52004 / 53004 etc.). The carrying case is designed so you can attach the applicators to your bottle without touching it, so your hands will not get greasy. It also has room for the original bottle cap.
Be careful not to apply too much oil. You should wipe off any excess oil.
Information about build plate adhesion
It's generally possible to print the tips without a brim. Depending on the material used it can be challenging. If you have trouble with build plate adhesion you can add a brim.
There are also versions for other printers:
A1, A1-mini
https://makerworld.com/en/models/1176294-super-lube-applicator-caps-for-a1-a1-mini-box
P2S
https://makerworld.com/en/models/2263253-p2s-super-lube-applicator-caps-box
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1119)