This is a book with pages to hold the Bambu Filament Swatches as well as the Compact Filament Swatch. Both types of swatches (if you need additional swatches) and a sample of each swatch holder (to sample the fit of the holder without printing the whole page) are included on a separate plate.
Highlights
- Holds all your swatches in an easy-to-view layout
- Can pop a swatch out of its holder by pressing on it from the back opening
- Each page for the Bambu Filament Swatches can hold 40 swatches (8 x 5 layout)
- Each page for the Compact Filament Swatch can hold 12 swatches (3 x 4 layout)
- Additional pages can be printed if you are planning to add in your own swatches
- The front cover, back cover, and pages can be printed in different colors
Required parts
- Bambu Filament Swatches - only required if you don't have it already and plan to print the pages on Plate 2
- Binder rings (Amazon affiliate link) - I included a set of multiple sizes in case your book gets thicker
Printing notes
- There are 4 plates (you do not need to print them all)
- Plate 1: Cover
- Print this twice to get the front and back cover
- Plate 2: Bambu Filament Swatch page
- Print this twice to complete the Bambu Lab set
- Print as many as needed for additional samples
- Plate 3: Compact Filament Swatch page
- Plate 4: Swatches and sample holders
- Print as many swatches as needed
- Print the holders if testing the fit
- Print by parts if using Bambu Handy to get what you need
- While almost all of the swatches are a snug fit in the holder, I noticed about 2 swatches in my set that are a tad bit smaller than the rest – they will fit in the holder just fine but end up being much easier to pop out (I find that a tiny piece of tape in the holder will help hold it down)