Tweeting Bird
Print Profile(11)
Description
If you like this model I created more fancy version of it. It is available here
https://makerworld.com/en/models/1148442#profileId-1152223
Instruction
Pour water into model and make bird music :)
Water level should be like on a picture or a little more.
If bird only whistle try tilt it forward. You have to find spot where water is bubbling by you blow. Different tone of tweeting is achive by tilting bird and strenght of blowing.
Versions
There are two versions of TweetyBird
1. TweetyBird of normal size. It can produce a little different tones and a little different types of tweeting like on movie below. It is easy to make proper sound. However print time is about 1.30 h
2. TweetyBird smaller by 50% of normal version. I had to make some adjusment to it work and proper print. It sound quite similar to normal size bird, but can produce only one tone of tweet and it is a little harder to make proper sound. However print time is only 30 min.
Printing
Printed with Prusa mk2: 0.6 mm nozzle, 0.2 mm layer height, filament: Print-me Ecoline, Plast-Spaw.
Presentation
And how it works.
Have fun :)
Media:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1253)