Realistic Charizard Dragon Head
Copyright Claim
Realistic Charizard Dragon Head
Boost
777
1076
79
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
59.5 h
6 plates
0.2mm layer, 2 walls, 15% infill
Designer
59.5 h
6 plates
Scaled 75% - All Printers
31.6 h
6 plates
Boost
777
1076
79
16
1.1 k
924
Released
Description
Split head of Kaijumon Charizard. Designed to be printed on FDM printers and tested on Bambu X1 carbon.
Scaled up to fit the maximum build plate volume and orientated to require minimum supports.
Comment & Rating (79)
All
a very good file to print very detailed I ended up doing a shiny charizard with a gray shimmer paint and UV resin painted mouth on the teeth and eyes and tongue and used fish line and UV resin to get the strands of saliva
(Edited)
The designer has replied
33
Reply
Wow incredible work
1
Reply
That is a fantastic build! Thank you for sharing!!
1
Reply
Replying to @locketts97
no worries
0
Reply
Just finished up mine for my son. He LOVES it!
1
Reply
Nice golden touch. Which filament did you use to get this shiny metallic look?
0
Reply
Replying to @moppi
looks like pla silk gold I have a silk gold color and it looks like this 🤔
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed great! no failures in print. teeth printed on ender 3 in pla blue green and in glow in dark green pla on x1c
2
Reply
This has been an absolutely fun piece to print all together. it took me about 3 days to print everything on the x1c. Assembly. took a few moments to figure out the teeth need to be glued and there's a little bit of wiggle room. I decided to do the shiny Charizard like the other user did using cookiecad starry black along with cool white from sunlu and cookiecad cherry red for the tongue and red on the eyes.
I did a 10% infill for the entire piece with .2 layers. took approximately the kilogram and black and maybe a 10th of that in white and red.
2
Reply
Boosted
Print Profile
Scaled 75% - All Printers
petg with a .6 nozzle on my p1s
(Edited)
0
Reply
Boosted
haven't done the tip spikes yet I printed them I. white but think I. going to reprint the. I. orange to match his head what color did everyone else do kinda wish there was a option to just remove the holes or plugs for them
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
A long journey to print, but very impressive!
1
Reply
very very very nice compliment.
just a question, aren't there any teeth missing?. the ones to put on the top of your head to be precise.
(Edited)
The designer has replied
0
Reply
Yes, it looks like I might have forgotten about the top neck spikes.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
bello ma complicato da incollare in tutte le sue parti
0
Reply
Print Profile
Scaled 75% - All Printers
this was very cool, loved it!!!
0
Reply
Print Profile
Scaled 75% - All Printers
Used .2mm layer height, .4mm nozzle, and a gyroid infill. Printed with PLA. I absolutely love this model, it looks amazing!!
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld