TicTacToe - Travel Edition by Josh-3D

Josh-3D

Toys & Games>Board Games

Print Profile(9)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

AMS, 0.2mm layer, 3 walls, 10% infill, 4 bottom layers

Designer

6.6 h

3 plates

4.9(529)

Just the X&Os split plates for two colors, 0.2mm layer, 3 walls, 10% infill

Designer

54 min

2 plates

4.9(37)

lid lock bracket - 0.2mm layer, 2 walls, 15% infill

29 min

1 plate

4.9(88)

The Pocket - 50% AMS, 0.2mm layer, 3 walls, 10% infill, 4 bottom layers

2.7 h

3 plates

4.8(33)

Click to see more

Open in Bambu Studio

Boost

2868

5131

858

355

5.5 k

6.3 k

Released

Description

Check out the other two games in the series

Checkers

Chess

[Update] After getting some feedback, I adjusted the print profile, so the color change isn't discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!

[Update 2!] Shout out to Wcad00 for the added clip!

[Update 3!] Shout out to SoftWareCrash and Adminstrator for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.

A Travel TicTacToe game, for those long spans stuck at sea, where you don't want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!

Player piece quantity is setup so that X goes first!

The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.

-------

If you like my work, consider showing your love by Buying me a coffee. Additionally, if you're looking to sell prints of my design, please check out my Patreon page for more information.

Comment & Rating (858)

@salvifibra

Boosted

Print Profile

AMS, 0.2mm layer, 3 walls, 10% infill, 4 bottom layers

Glow in the dark 🔝

@3dcj

Darf man fragen welches Filament genau du für das Glow genommen hast?

(Edited)

@salvifibra

Boosted

Replying to @3dcj :

Glow in the dark bambulab

@user_932524364

wow！~

@rptechnic

Print Profile

AMS, 0.2mm layer, 3 walls, 10% infill, 4 bottom layers

great model :)) printed on my P1S

@johnwesterberg

what filament is that grey/white?

@rptechnic

It‘s the marble grey PLA from Prusament

@rb89

very nice choice in filament and color!

@Pelted

Just printed this, love the look and design. Tolerances on the pieces, especially the Os is a little tight. A bit frustrating trying to get the pieces out. I ended up with some odd warping printing the lid, but that may just be the filament. It also seems like it could use a bit more room in the tolerances. (Looking closely at some of the other folks' print images, I see the same lid issue I had.)

(Edited)

The designer has replied

@Josheh_3D

Hey, thanks for the feedback. I had been thinking about tweaking the tolerances on the player pieces a little. You're feeling the lid might be a little tight too though?

@Pelted

Replying to @Josheh_3D :

adding a bit more tolerance to the pieces would be super helpful. as we’ve played it the pieces have loosened a bit but it still takes two hands to remove them. The lid is something else. I don’t know if it’s the infil pattern but I’m going to reprint it since it is the first part that ever “warped” on me from the included profile.

@Josheh_3D

Replying to @Pelted :

I have updated the print profiles since, and added a little more tolerance on the game pieces themselves! Which model of printer are you printing on? The warping of the lid concerns me. I haven't encountered that yet, but certainly interested if there's anything I can adjust to help as a preventive measure. I've been printing on a X1C.

@ufocet

Print Profile

AMS, 0.2mm layer, 3 walls, 10% infill, 4 bottom layers

Excellent design! Print profile is good but maybe you can reduce how many layers of color there is on the top plate. Since the colors only show on the top it doesn't need to go that deep. (this could greatly reduce filament waste). Otherwise flawless!

(Edited)

The designer has replied

@Josheh_3D

Good point! I need to experiment some with what's a good depth that wont bleed on even semi-transparent materials. Been trying to account for that. I think you're right though. Thanks for the feedback!

@ufocet

Replying to @Josheh_3D :

Attached a cooler photo of the print :) FYI

@lukas.duus

Print Profile

AMS, 0.2mm layer, 3 walls, 10% infill, 4 bottom layers

The end result is awesome! You can almost not see that this is a 3D-printed model.

@user_1370020764

beautiful color combination .. which is the white base color ? marble ?

@lukas.duus

Replying to @user_1370020764 :

yes marble from Bambu Lab

@Wcad00

Boosted

hope you don’t mind, I added a print profile for a locking bracket for the lid, it was just to loose for me and defeated the purpose of a lid, or carrying it anywhere