Hydrometer stand

Description

This specially designed 3D-printed stand provides a stable and elegant holder for a digital hygrometer with a temperature display. These hygrometers are mostly used in the water absorber boxes for the AMS and usually come in a set of 3 to 6 (https://www.amazon.de/dp/B07JDSHD4Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). The design ensures optimal visibility of the display and protects the device from accidentally tipping over.

Features:

• Perfect Fit: Designed for a digital hygrometer with a round display.
• Stable Construction: Ensures a secure stand on various surfaces.
• Ergonomic Tilt Angle: For easy readability of values.
• Ventilation Slots: Ensure accurate measurement without heat buildup.
• Easy to Print: Compatible with standard 3D printers using PLA

3D Printing Instructions

 Assembly & Usage:

1. After printing, ensure all surfaces are clean.
2. Insert the digital hygrometer into the holder. It should fit snugly but not too tightly.
3. Place the stand in a well-ventilated area for accurate measurements.
4. The display is now optimally readable, and the device remains protected.
5. The opening at the back makes it easy to remove for battery replacement
6. The openings on the back should be well exposed to the environment to ensure the best possible measurement of humidity.

Conclusion

This 3D-printed stand is a simple yet effective solution for securely placing a digital hygrometer with a temperature display. Perfect for indoor use, laboratories, or as an accessory for homebrewers.