Year of the Dragon Hueforge NO AMS Needed by RP47 Designs

RP47 Designs

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

AMS 0.08mm layer, 1 walls, 100% infill

Designer

3.4 h

1 plate

5.0(29)

NO AMS Pauses for manual filament changes 0.08mm layer, 1 walls, 100% infill

Designer

3.3 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

106

185

370

136

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 200mm x 200mm

You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a three color hueforge, it will require two pauses with manual filament changes.

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #15 (1.2mm) swap to Grey
At layer #20 (1.44mm) swap to White for the rest.

dragon

art

year of the dragon

year of the dragon 2024

2024

hueforge

black and white

Comment & Rating (49)

@aayushsb

Amazing! Thanks! Printed in Red, dark gold and yellow gold.

The designer has replied

@RP47

Wow! That looks great! Great color choices.

@sbrt_cr

Thank you for this amazing model! My first hueforge print. Took me a bit to figure out how to match color swaps with AMS positions, and then realized I could do it all after slicing. This was stunning and set the bar for me. Inspired me to get my own copy of HueForge and join the Discord. So much to learn! My print settings: *Your recommended slicing settings *Bambu 0.2 mm Stainless Steel nozzle *SUNLU PLA Meta Black, Grey, and White, all calibrated flow and pressure advance to 0.2 mm nozzle

@nicko

Print Profile

NO AMS Pauses for manual filament changes 0.08mm layer, 1 walls, 100% infill

I used the shiny silver PLA instead of the gray and it came out great!

The designer has replied

@RP47

Turned out great!

@honor.3d

Print Profile

AMS 0.08mm layer, 1 walls, 100% infill

One of my favorites hueforge models. I love it!!

@AC3DNix

Super.

@mcdavidrw

Print Profile

AMS 0.08mm layer, 1 walls, 100% infill

Came out nice

@jim_2835

Thanks for the print. Red, gold then yellow in my case!

@jermwhl

Print Profile

AMS 0.08mm layer, 1 walls, 100% infill

Bambu pla basic black, with polyterra gray and white. Looks better than expected!

@jlbaker

Print Profile

AMS 0.08mm layer, 1 walls, 100% infill

Awesome print, turned out great!

(Edited)

@fetes.heavier_0

is it possible to resize this model to fit A1 mini?

@chris.staley

You should be able to do this yourself in Bambu Studio by resizing the print to 75% or so

@sbrt_cr

Replying to @chris.staley :

I found that trying to resize destroyed the proper slicing and lost layers. Saw some folks with similar issues post on BL reddit forums - https://www.reddit.com/r/BambuLab/comments/17smtvf/how_do_you_correctly_resize_hueforge_in_bl_studio/

@egrep_

Replying to @sbrt_cr :

Only resize on the X and Y axis. Don't modify the Z.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.