I designed this specifically for the Shrek tissue box I made; https://www.thingiverse.com/make:961845. It holds the box up to the perfect height for dispensing and I think it adds a nice presentation.

This was printed in PRILINE Light Wood PLA on an Ender 3 Pro. However, I have printed wood PLA on my X1C using the generic profile with the nozzle temp lowered to 200C. I gave the base a light sanding using 400 grit before some thick coats of dark walnut stain.

This will only work if you scale the original Shrek tissue box by 130%. https://www.thingiverse.com/thing:2893314

Also, I use one of the nearly square tissue boxes that are 4.5in x 5in (12.5mm x 13.2mm), but I cut off 0.25in from the height to to fit in the scaled Shrek model as I tilt the tissue box on its side with the opening facing the mouth. I also take a few tissues out before loading since the box has been shortened.