Print Profile(3)
0.2mm layer, 2 walls, 30% infill
Designer
1.1 h
1 plate
A1 Mini 0.2mm layer, 2 walls, 30% infill
Designer
1.1 h
1 plate
Better Quality 0.2mm layer, Scarfed Seam, Wall order
1 h
1 plate
Open in Bambu Studio
Boost
4
6
2
0
20
8
Released
Description
I made a Elden Ring coaster with the logo on it for a friend of mine.
Designed to be multi colored but can also be printed one color.
I would recommend to scale it at about 110% for a 10cm diameter coaster. 30% infill for a nicer finish.
If you have and ideas or reccommendations let me know.
Have fun printing
Comment & Rating (2)
All
Print Profile
0.2mm layer, 2 walls, 30% infill
Other Issues:The surface finish was not so good on the first one i printed
(cause the printer is so fast and ironing does not look as good as printbed finish)
Also the seam was quite visible.
I fixed those problems with just flipping the print and adding scarf seam joint.
(I uploaded a print profile as well)
the picture down below is my tweaked profile
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld