UPDATE 25/3/2023
thickened bracket as noticed it heat creeps over time. this reduces the amount tap can move but should still trigger.
print standing on its end.
Uses
4x m3 heatsets
2x m3x10
Attach probe to bracket with included small screws
Attach the bracket to tap carriage with 2 m3x10 screws in the bottom by replacing the existing 2x m3x6 screws from tap
probe y offset = 65
probe x offset = 0
note may have to add something to physical end stops if beacon interferes with homing hitting on rear motor. hall effect end stops work without adjustment
Used tap cad files and beacon cad file to help with design found here
Tap
https://github.com/VoronDesign/Voron-Tap
Beacon
https://github.com/beacon3d/docs/blob/master/mcad/beacon/Beacon_RevD_Assm_Normal.STEP