Towel Hook v3
Towel Hook v3
Boost
37
77
20
Print Profile(3)
Screws
Designer
1.2 h
1 plate
No Screws
Designer
1.2 h
1 plate
Screws (Hook scale 102%)
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
37
77
20
1
189
177
Released
Description
Towel hook I found interesting on Pinterest, decided to make my own.
0.12mm layer – for better quality, but feel free to change it
I used Black Matte PLA
It uses 2 screws.
Could also be mounted using double sided tape
Comment & Rating (20)
All
Print Profile
Screws
Tolerance a bit too tight but it's good
The designer has replied
2
Reply
Thank you for the feedback :). I tried to minimize the tolerance as much as possible in order not to have it lose while grabbing the towel but I can change that, or scale down the model.
0
Reply
As others said, normal print is too tight for my taste, difficult to remove. Printing the hanger at 101% is tight but you don't need super strenght to remove it. At 103% as pointed out works fine, but too easy to remove and could be removed by accident.
2
Reply
Print Profile
Screws
Took a few tries to get it to fit correctly.
Ended up with 100% scale for the adapter and 103% scale for the mount/hook.
Broke multiple times with standard settings, so I printed on its side and had to adjust settings for better strength.
6 walls
25% Gyroid Infill
auto generated supports for slide channel
2
Reply
Print Profile
No Screws
Good
1
Reply
Print Profile
Screws
passt alles perfekt auch sofern ich beides mit der selben Größe drucke
1
Reply
Printed great. With pla + the print was perfect and with regular pla it was a little tighter than the pla+, but still great.
1
Reply
Print Profile
No Screws
Work great
1
Reply
Print Profile
No Screws
1
Reply
Boosted
Print Profile
No Screws
1
Reply
Print Profile
Screws
1
Reply
© 2024 MakerWorld