Gogojd21

cover

plate_1.png

sodejm

PXL_20240319_132118755_0efcc261-97d4-473e-9adf-b1653a5155c8.webp

.18mm Layer Height4 Walls for strength (kids are tough)Normal InfillRandom seam for aesthetic

0.18mm layer, 4 walls, 15% infill, Random Seam

Chaotic Genius

Pascal - Chaotic Genius 3D.jpeg

Print Profile for Pascal (Rapunzel Cosplay):<ul><li>Magnet Placement in Pascal's Feet:<ul><li>Front feet: 6mm diameter, 3mm height magnets (2 pieces).</li><li>Back feet: 8mm diameter, 3mm height magnets (2 pieces).</li></ul></li><li>Magnet Functionality:<ul><li>The magnets in Pascal’s feet allow for mounting the figure on the shoulder using a piece of fabric with sewn-in magnets.</li></ul></li><li>Pause Instructions:<ul><li>Pause the print at layer 22 to insert the magnets.</li></ul></li><li>Insertion Tips:<ul><li>The magnets will fit very tightly. Use gloves to handle the print and avoid smudging the surface.</li></ul></li><li>Total Magnets Needed:<ul><li>4x 6mm diameter, 3mm height magnets.</li><li>4x 8mm diameter, 3mm height magnets.</li></ul></li><li>Support Removal:<ul><li>Gently remove the supports, taking care not to accidentally break the feet.</li></ul></li></ul>

0.18mm layer, 4 walls, 15% infill

The Gooser

IMG_9857_e8d9b5ac-62ff-4fc9-8779-024072374499.webp

IMG_9856_7db271b9-2987-4e42-8e3d-841c60fe983e.webp

IMG_9853_0fb80e8d-d305-4f28-99cb-5e0bff3b70a7.webp

IMG_9854_e77118e7-4a35-4059-88ff-9f6efceb2b43.webp

Size - 74.3mm LONG x 36.8m WIDE x 38.6mm TALLQuick Print:WITH Easy to remove Tree Supports - see pictures!Time: 58 minutesFilament: 12.7 g Black PLA

3" LENGTH ~ A1 MINI ~ 0.2mm layer, 4 walls, 10% infill

this is a 3d replica of the lizard from Rapunzel

pascal

ASIA

Print Profile(3)

Description

Comment & Rating (188)

License

Related Models