NOTICE:

THIS IS A SIMPLE PRINT. AS YOU SEE IN THE PICTURES , MY MODELS , THE CAPS , THEY STICK VERY GOOD ON THE BED. SO BEFORE YOU GIVE BAD RATING TO MY PROFILES, BE SURE YOU HAVE A GOOD BED ADHESION AND ASK TO YOURSELF , WHY YOU DON'T HAVE A GOOD BED ADHESION.

THOSE ARE 2 GOOD PROFILES , I USED THE FIRST AND IT WORKS!

I DON'T WANT TO UPLOAD A LOT OF PROFILES FOR EACH SINGLE PROBLEM YOU HAVE AND FOR EVERY SINGLE MODEL! EVEN YOU WANT TO SHARE ONE , IT DOESN'T MAKE SENSE FOR THE SIMPLE MODEL ITSELF!

PLEASE, LIKE I SAID THE CAPS STICK SO GOOD ON THE BED ! NOT ALWAYS THE SPEED CAN HELP YOU TO STICK EVERY MODEL ON THE PLATE! THANK YOU FOR THE UNDERSTANDING!

CAPS WERE PRINTED ON THE ORIGINAL BAMBU LAB TEXTURED BOTH SIDE PLATE.

MODEL:

I design this screw caps for the back side. It fits in the X1C, X1 , X1E , P1P and P1S.

PRINTED WITH BAMBU LAB WHITE ABS ON BAMBU LAB TEXTURED PLATE WITHOUT GLUE!

AT THIS LINK YOU WILL FIND THE CAPS WITH THE BAMBU LAB LOGO ON:

https://makerworld.com/it/models/126343#profileId-136503

AT THIS LINK YOU WILL FIND THE CAPS BLANK:

https://makerworld.com/it/models/126376#profileId-136547

AT THIS LINK YOU WILL FIND THE CAPS WITH THE BAMBU LAB LOGO:

https://makerworld.com/it/models/126343#profileId-136503

If you have problems about this model, just send me a private message and I'll help you.

Give me a like and follow my page.

Thank you to support me and happy printing.