cover

_MG_9884.JPG

Vase.png

plate_1.png

_MG_9883.JPG

The print profile I have included takes advantage of the vase mode feature, allowing the vase to be lighter, use less filament and print faster. This vase can&#39;t hold water because the walls are too thin. The vase is too large to be printed on the A1 mini. Sorry A1 mini fans :(<ul><li>Total weight: Around 29g</li><li>Total filament length: Around 10.4 meters</li></ul>

0.16mm layer, 1 wall, 0% infill, Vase mode, Can't hold water

2025-03-29_fc408432d44a28.jpg

The print profile I have included prints the model with no infill, but uses two walls, which is the maximum number of walls for the width of the vase, so that it adds weight to the vase. This vase is also able to hold water because the vases walls are thicker. The vase is too large to be printed on the A1 mini. Sorry A1 mini fans :(<ul><li>Total weight: Around 93 grams</li><li>Filament length used: Around 31 meters</li></ul>

0.16mm layer, 2 walls or 100% infill, can hold water

3D Prints by NTD

e3d.jpeg

Profile for users of E3D High Flow ObXidian hotend 0.4 also can hold water ( tested )

E3D High Flow ObXidian nozzle HF profile

A delicate, beautiful vase for home decor. One of the print profiles I have included has thicker walls for the vase so that it is able to hold water.Enjoy!&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you have enjoyed this model, consider leaving a boost to support me.</boostcontent></boostme>

Print Profile(3)

Description

Comment & Rating (157)

License

Related Models