Trading Card Organizer by FilamentWizard

FilamentWizard

Hobby & DIY>Other Hobby & DIY

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

Dividers

Designer

6 h

1 plate

5.0(3)

Triple Box

Designer

42.4 h

2 plates

Single Box

Designer

19.9 h

2 plates

0.16mm layer, 2 walls, 15% infill

10.8 h

3 plates

4.8(82)

Open in Bambu Studio

Boost

339

678

115

118

1.5 k

1.1 k

Released

Description

Created to bring together and arrange your collection of trading cards. The modular design, with dividers, allows for easy customization. You can even keep extra separators at the front and back of the box, ensuring flexibility for your evolving card collection.

If your printer tends to warp, consider using a brim, especially when dealing with the sizable flat surfaces and extended print times required for this community-oriented card storage solution.

Comment & Rating (115)

@Dutch3d

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

printed one, fits together perfect. 1 corner didnt print great but thats my fault and i broke the lid ad the printline after using it a few times. the long side with thin wall snaps off easy, so be carefull with it

@robert.elder251

How did you fix the corner (what you have in your picture)? My boxes print out well, but need to add an extra wall layer (it looks like the infill pattern may be causing an artifact on the bottom layers of the print). This is a simple set of adjustments though.

@Dutch3d

Boosted

Replying to @robert.elder251 :

I didnt fix it, left it like that and didnt print more because the lid is to weak if you make it long.

@Sk8er1113

Boosted

Made a couple with custom lids/dividers, came out great! love the boxes! The corners pulled up on the first one a bit but nothing a few swipes of a glue stick didn’t fix.

@MieMie

Print Profile

0.16mm layer, 2 walls, 15% infill

printed for my lorcana collection

@BillyGrillie

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Printing worked without any problems

@EvilLipSmacker

Print Profile

0.16mm layer, 2 walls, 15% infill

Loved it but made it bigger for my needs. Either way you won’t be disappointed in this print. Thank you.

@user_3508824203

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

@MrShoosh

Is there a lid file for the standard size holder?

@user_3103833353

Missing the lid file too

@MrShoosh

Replying to @user_3103833353 :

I ended up resizing the larger lid to match the same measurements (length & width) on the main case and it fit perfectly. A touch loose, which I liked because it comes on and off easily and still looks flush. But if you're carrying it in a backpack, or something like that, you may need it tighter.

@user_3103833353

Replying to @MrShoosh :

Will try that... we will see :)

@kyrosebates

The longer doesn't fit on any bambu printer

The designer has replied