Trading Card Organizer

Trading Card Organizer

Boost
412
921
151

Print Profile(3)

All
A1
P1S
P1P
X1 Carbon
X1E
X1

Dividers
Dividers
Designer
6 h
1 plate
4.8(9)

Single Box
Single Box
Designer
19.9 h
2 plates
4.8(8)

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
10.7 h
3 plates
4.8(94)

Open in Bambu Studio
Boost
412
921
151
168
2 k
1.3 k
Released

Description

Created to bring together and arrange your collection of trading cards. The modular design, with dividers, allows for easy customization. You can even keep extra separators at the front and back of the box, ensuring flexibility for your evolving card collection.

If your printer tends to warp, consider using a brim, especially when dealing with the sizable flat surfaces and extended print times required for this community-oriented card storage solution.

Comment & Rating (151)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
printed one, fits together perfect. 1 corner didnt print great but thats my fault and i broke the lid ad the printline after using it a few times. the long side with thin wall snaps off easy, so be carefull with it
0
Reply
How did you fix the corner (what you have in your picture)? My boxes print out well, but need to add an extra wall layer (it looks like the infill pattern may be causing an artifact on the bottom layers of the print). This is a simple set of adjustments though.
0
Reply
Boosted
Replying to @robert.elder251 :
I didnt fix it, left it like that and didnt print more because the lid is to weak if you make it long.
0
Reply
Boosted
Made a couple with custom lids/dividers, came out great! love the boxes! The corners pulled up on the first one a bit but nothing a few swipes of a glue stick didn’t fix.
0
Reply
hello how are you able to put text there like you did?
0
Reply
Print Profile
Single Box
printed perfectly!
0
Reply
Print Profile
Single Box
looks great
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
clean your plate juste before starting this print to avoid adhesion problems!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
printed for my lorcana collection
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Printing worked without any problems
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Loved it but made it bigger for my needs. Either way you won’t be disappointed in this print. Thank you.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Is there a lid file for the standard size holder?
1
Reply
Missing the lid file too
0
Reply
Replying to @user_3103833353 :
I ended up resizing the larger lid to match the same measurements (length & width) on the main case and it fit perfectly. A touch loose, which I liked because it comes on and off easily and still looks flush. But if you're carrying it in a backpack, or something like that, you may need it tighter.
0
Reply
Replying to @MrShoosh :
Will try that... we will see :)
0
Reply