Spice Rack
Copyright Claim
Spice Rack
Boost
104
208
12
Print Profile(1)
0.2mm layer, 4 walls, 50% infill
Designer
6.6 h
3 plates
Open in Bambu Studio
Boost
104
208
12
1
197
160
Released
Description
This is a simple spice rack meant to screw into the inside of a kitchen cupboard.
You'll need 4x13mm (or slightly larger) mounting screws for mounting. When printing, note that you'll need to reduce the fan speed on the crossbars by 50% to prevent curling; the provided profile already does this. Print in tough PLA; PETG isn't stiff enough.
For modifications, use https://cad.onshape.com/documents/13c95ca3e8fceb55aa539df9/w/dff11cd85dea3cc66ba1f0eb/e/6db77b4d4793c71ab7b84710
Comment & Rating (12)
All
Print Profile
0.2mm layer, 4 walls, 50% infill
Worked well however needs to include a wide brim for vertically oriented components by default.
The designer has replied
0
Reply
That shouldn't be necessary; the profile is how I printed mine. Not that there's a real downside, but did you try soap and water on the buildplate?
0
Reply
Boosted
really enjoyed it. thanks for sharing the cad, i needed to make mine a bit bigger<3
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 50% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld