UPDATE - I've added a core to be printed in Glow in the Dark (Luminous) Filament which slides inside and makes it shine! Profile and STL added as Glow Core!

This is a rework of the original Plasma Core model which I've updated, refined and combined for AMS printing. The base is a completely original design using design concepts from the core to emulate the ThinkGeek Chronic Collectible Power Core. I scaled up the original model about 142% for a more practical size and combined the top parts to give it a more seamless and smoother print. The supports are easy to remove and this is a beginner level print, just use the profile, load up your preferred colors in the AMS and you should be all done in 10 hours.

This model requires 1x Top, 1x Bottom, 1x Plasma Core, 4x Copper Quarter, 4x Copper Arch and 2x Copper Half. The Copper Arch and Copper Arch Pieces snap into the Plasma Core without any glue required, and the Copper Quarters need a spot of glue. Top and Bottom screw onto the Core and the entire unit sits on the base with a very satisfying fit and spins freely.

Supports are required and are fairly easy to remove. I found the transparent green supports extremely strong but brittle so start by shattering them in the middle and work upwards, then do that again until you reach the bottom. Plate 3 with the copper parts does not need supports at all, so feel free to turn them off when printing these but please remember to turn them back on for the other plates!

Printed with Transparent Green PLA, Silver, Black and Bambu Iridium Gold Metal but feel free to substitute any of these as you wish.

Please like and share your results!

If you'd like to buy me a coffee to support this and future projects, I'd really appreciate it! https://www.buymeacoffee.com/faran3d